W5500 Wiznet Driver
W5500 Wiznet Driver
Driver for Wiznet ethernet chip
- Attachments
-
- wiznet.zip
- (1.55 MiB) Downloaded 417 times
Re: W5500 Wiznet Driver
tfAteba wrote:Thanks,
Can you tell us a bit about your project please?
I was a demo i did, it allowed low cost MCUs like STM32F030 to have Ethernet connection. Interface to W5500 is over SPI.
- Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: W5500 Wiznet Driver
Yes and no, for starters i used the W5500 ethernet shield
https://www.digikey.co.uk/product-detail/en/wiznet/W5500-ETHERNET-SHIELD/1278-1028-ND/5402376?utm_adgroup=General&mkwid=sVvPYSQOC&pcrid=71112009026&pkw=&pmt=b&pdv=c&gclid=Cj0KCQjwtZzWBRD2ARIsAIPenY0w-ci42GkGnx9NHAyPC1fbUwnNLcWAWfX5Wo8b83EF7bAhKEBZ2YoaAnKoEALw_wcB
This will plug onto most nucleo boards
After that i used some custom hardware
https://www.digikey.co.uk/product-detail/en/wiznet/W5500-ETHERNET-SHIELD/1278-1028-ND/5402376?utm_adgroup=General&mkwid=sVvPYSQOC&pcrid=71112009026&pkw=&pmt=b&pdv=c&gclid=Cj0KCQjwtZzWBRD2ARIsAIPenY0w-ci42GkGnx9NHAyPC1fbUwnNLcWAWfX5Wo8b83EF7bAhKEBZ2YoaAnKoEALw_wcB
This will plug onto most nucleo boards
After that i used some custom hardware
Who is online
Users browsing this forum: No registered users and 7 guests