[TODO] HAL for Watchdog timer (for STM32F10x)

This forum is about you. Feel free to discuss anything is related to embedded and electronics, your awesome projects, your ideas, your announcements, not necessarily related to ChibiOS but to embedded in general. This forum is NOT for support.
User avatar
z80
Posts: 20
Joined: Mon Oct 08, 2012 5:36 pm

[TODO] HAL for Watchdog timer (for STM32F10x)

Postby z80 » Fri Jan 04, 2013 11:38 am

Hi!

I failed to find ready to use Watchdog timer HAL implementation for Chibios. So I had to implement it myself. Please, have a look.

watchdog.zip
STM32F10x IWDG HAL layer and Watchdog abstract driver.
(5 KiB) Downloaded 663 times

User avatar
Giovanni
Site Admin
Posts: 13086
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 759 times
Been thanked: 637 times
Contact:

Re: HAL for Watchdog timer (for STM32F10x)

Postby Giovanni » Fri Jan 04, 2013 6:34 pm

Hi,

Good job, I will look into including it into the HAL, apparently there is not much to add there, if anything.

Giovanni

dsigma
Posts: 13
Joined: Sat Jan 26, 2013 12:18 am

Re: HAL for Watchdog timer (for STM32F10x)

Postby dsigma » Sun Dec 29, 2013 11:55 pm

Hi Giovanni, I was wondering if you were planning on integrating this at any point in time? This would be very useful...

Best Regards,
-D

User avatar
Giovanni
Site Admin
Posts: 13086
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 759 times
Been thanked: 637 times
Contact:

Re: HAL for Watchdog timer (for STM32F10x)

Postby Giovanni » Mon Dec 30, 2013 10:18 am

Hi,

Sorry I forgot about this, I will put it in list for 3.0.

Giovanni

dsigma
Posts: 13
Joined: Sat Jan 26, 2013 12:18 am

Re: [TODO] HAL for Watchdog timer (for STM32F10x)

Postby dsigma » Mon Dec 30, 2013 7:08 pm

cool! thanks! :)

JamesS
Posts: 14
Joined: Wed Jan 08, 2014 12:45 am

Re: [TODO] HAL for Watchdog timer (for STM32F10x)

Postby JamesS » Mon Jan 13, 2014 2:24 am

Now trying on STM32F407.

Integrated and builds clean.

Thanks.

James.

Vik
Posts: 23
Joined: Mon Apr 15, 2013 9:30 pm
Location: London, United Kingdom

Re: [TODO] HAL for Watchdog timer (for STM32F10x)

Postby Vik » Sat Feb 15, 2014 4:55 pm

Hi all,

I can confirm that this works perfectly on the STM32F303 (F3 Discovery board).

Many thanks for this z80, I was just at the point where I would have needed to write it myself, so you saved me a few days of development time :)

Cheers,
Vik


Return to “User Projects”

Who is online

Users browsing this forum: No registered users and 1 guest