I made an example project showing how to use the ChibiOS/HAL with FreeRTOS. You can find it here: https://github.com/BertoldVdb/FreeRTOS-ChibiOSAL
The Cortex-M3 part is quite well tested on a STM32F103 chip, running a few quite big programs. The Cortex-M0 part is very new and not really tested.
One of the projects using it is the firmware of a frequency converter (https://github.com/BertoldVdb/FreeRTOS-ChibiOSAL) for the http://electrosense.org project.
This forum is about you. Feel free to discuss anything is related to embedded and electronics, your awesome projects, your ideas, your announcements, not necessarily related to ChibiOS but to embedded in general. This forum is NOT for support.
3 posts • Page 1 of 1
- Site Admin
- Posts: 13008
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 742 times
- Been thanked: 620 times
You should post about this work on the FreeRTOS board too probably, interested users would be there.
Who is online
Users browsing this forum: No registered users and 1 guest