Post your PCB

This forum is about you. Feel free to discuss anything is related to embedded and electronics, your awesome projects, your ideas, your announcements, not necessarily related to ChibiOS but to embedded in general. This forum is NOT for support.
MitchD
Posts: 2
Joined: Thu Aug 14, 2014 2:29 pm
Location: Wiliamsburg, VA
Contact:

Re: Post your PCB

Postby MitchD » Tue Aug 19, 2014 7:41 pm

STM32L151 for Virginia Tech's camera experiment on AMSAT's FOX-1 satellite

http://i.imgur.com/WvimSAF.jpg

https://github.com/mitchd/vt-fox-1

Running ChibiOS 2.4.3 with some modifications for the processor and LQFP144 package. I forget exactly what I had to do to enable the peripherals I wanted, but they weren't quite fully implemented yet.

User avatar
barthess
Posts: 861
Joined: Wed Dec 08, 2010 7:55 pm
Location: Minsk, Belarus
Been thanked: 7 times

Re: Post your PCB

Postby barthess » Tue Aug 19, 2014 7:54 pm

@ErikZalm
What is it? Industrial controller?

@MitchD
What the IC between camera and MCU? Is it RAM?

MitchD
Posts: 2
Joined: Thu Aug 14, 2014 2:29 pm
Location: Wiliamsburg, VA
Contact:

Re: Post your PCB

Postby MitchD » Tue Aug 19, 2014 8:01 pm

It's a dual port FIFO

ErikZalm
Posts: 10
Joined: Fri May 11, 2012 9:10 pm

Re: Post your PCB

Postby ErikZalm » Tue Aug 19, 2014 8:59 pm

It is a 3D printer controller.


User avatar
Giovanni
Site Admin
Posts: 13008
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 742 times
Been thanked: 620 times
Contact:

Re: Post your PCB

Postby Giovanni » Fri Aug 22, 2014 11:36 am

Great work :)

User avatar
Tectu
Posts: 1226
Joined: Thu May 10, 2012 9:50 am
Location: Switzerland
Contact:

Re: Post your PCB

Postby Tectu » Fri Aug 22, 2014 8:33 pm

Something from my side:

http://abload.de/img/board_sideu0jg0.jpg
http://abload.de/img/board_topk5kgp.jpg
An SRAM and some LC-Filters are not populated yet. An SSD1963 based 5" touchscreen goes on top of that board (connector at the right edge).


~ Tectu

User avatar
Giovanni
Site Admin
Posts: 13008
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 742 times
Been thanked: 620 times
Contact:

Re: Post your PCB

Postby Giovanni » Fri Aug 22, 2014 9:06 pm

What's that? an oscilloscope?

Giovanni

utzig
Posts: 355
Joined: Sat Jan 07, 2012 6:22 pm
Location: Brazil
Has thanked: 1 time
Been thanked: 19 times
Contact:

Re: Post your PCB

Postby utzig » Fri Aug 22, 2014 9:40 pm

"Arbitrary Waveform Generator by Joel Bodenmann"... looks more like a signal generator!

Ah, I'd never heard of SiliconBlue FPGAs before, interesting! Very nice board, btw!

User avatar
Tectu
Posts: 1226
Joined: Thu May 10, 2012 9:50 am
Location: Switzerland
Contact:

Re: Post your PCB

Postby Tectu » Sat Aug 23, 2014 12:15 am

Giovanni wrote:What's that? an oscilloscope?

It is an arbitrary signal generator. Three channels, DC to 20MHz each, -12 to +12V with full range offset, three selectable filter banks (or bypass).
The hardware mainly consists of an STM32F102CB, an STM32F407ZGT and an ICE40HX FPGA. And it runs ChibiOS/RT & µGFX, of course :)

utzig wrote:Very nice board, btw!

Thanks, my "biggest" board so far (four layer, 0.1mm traces and impedance matching and all the crap).


~ Tectu


Return to “User Projects”

Who is online

Users browsing this forum: No registered users and 1 guest