Crossworks 3.0 Project file for STM32F4-Discovery demo

This forum is about you. Feel free to discuss anything is related to embedded and electronics, your awesome projects, your ideas, your announcements, not necessarily related to ChibiOS but to embedded in general. This forum is NOT for support.
Posts: 10
Joined: Tue Oct 15, 2013 3:52 pm

Crossworks 3.0 Project file for STM32F4-Discovery demo

Postby alexlesuper » Tue Oct 29, 2013 4:06 pm


I've created a ready-to-use Crossworks project file for the STM32F4-Discovery demo in ChibiOS. This file will not work with any previous version of Rowley Crossstudio.

All you need to do is:

    1. Create a directory for the crossworks project: ChibiOS-RT/demos/ARMCM4-STM32F407-DISCOVERY/crossworks
    2. Copy the attached project file into that directory.
    3. Open the project in Crossworks 3.0 or later


(1.73 KiB) Downloaded 238 times

User avatar
Site Admin
Posts: 13008
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 742 times
Been thanked: 620 times

Re: Crossworks 3.0 Project file for STM32F4-Discovery demo

Postby Giovanni » Tue Oct 29, 2013 5:06 pm

Well done, Crossworks users will appreciate this for sure.


User avatar
Posts: 6
Joined: Sat May 05, 2012 12:04 pm
Location: Sudbury, Ontario, Canada

Re: Crossworks 3.0 Project file for STM32F4-Discovery demo

Postby 8bitgeek » Sat Nov 02, 2013 1:30 am

3.0 is not released yet, we're anxiously awaiting it's release. Will it work with 2.3.3? I'll give it a go anyway...will repost if any changes are required.

Posts: 2
Joined: Fri Sep 26, 2014 8:39 am

Add: Crossworks 3.2 Project file for STM32F3-Discovery demo

Postby peets » Sat Oct 18, 2014 1:06 pm


From this information I generated a project for STM32F303Discovery. For details look at https: ... with-CW3-2

remains the question:
including "../../../os/ports/GCC/ARMCMx/STM32F1xx/" in place of "../../../os/ports/GCC/ARMCMx/STM32F3xx/"
- STM32F3xx (was used in the corresponding make file);

The F3xx compiles but creates a vector error during setup;

Is there a bug in the vector.c file of "../../../os/ports/GCC/ARMCMx/STM32F3xx/" ?

Return to “User Projects”

Who is online

Users browsing this forum: No registered users and 1 guest