Shell, MEMS & USBCDC

This forum is about you. Feel free to discuss anything is related to embedded and electronics, your awesome projects, your ideas, your announcements, not necessarily related to ChibiOS but to embedded in general. This forum is NOT for support.
User avatar
RoccoMarco
Posts: 635
Joined: Wed Apr 24, 2013 4:11 pm
Location: Salerno (Italy)
Has thanked: 78 times
Been thanked: 60 times
Contact:

Shell, MEMS & USBCDC

Postby RoccoMarco » Thu Jun 06, 2013 3:22 pm

Hi,
I'm new on this board and also in embedded. Someone asked me a demo on the use of MEMS for STM32f3, so i decided to publish this project. I have tried to write clear and detailed comments and readme also has been edited. I've also tried to follow the style of ChibiOS project and I hope this can be useful.

Code: Select all

*****************************************************************************
**          ChibiOS/RT HAL - ON_BOARD_MEMS for STM32F30x.              **
*****************************************************************************

** TARGET **

The demo runs on an ST STM32F3-Discovery board.

** The Demo **

This application demonstrates uses of shell, MEMS and serial over USB. When
application starts, shell is launched. Connect your board using "USB USER"
and using a Terminal, just insert "help" command to see all other commands
available.

** Required libraries **

In order to use this demos you need to need "l3gd20.h", "l3gd20.c",
"lsm303dlhc.h", "lsm303dlhc.c", "usbcfg.c", "usbcfg.h". These files
were included in the archive.

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com
Attachments
ARMCM4-STM32F303-DISCOVERY-ON_BOARD_MEMS.rar
Demo on MEMS, Shell and USBCDC for STM32F30x
(2.22 MiB) Downloaded 219 times

jscott
Posts: 129
Joined: Tue Jul 03, 2012 3:50 pm
Location: Middle Georgia, USA
Contact:

Re: Shell, MEMS & USBCDC

Postby jscott » Thu Jun 06, 2013 7:23 pm

oohhhh..... Nice looking demo.

I was working on something to read and manage the onboard devices, but have
been caught up in the details. This should help a lot!!

Thanks
-John Scott


Return to “User Projects”

Who is online

Users browsing this forum: No registered users and 2 guests