TODO: in files

Use this forum for requesting small changes in ChibiOS. Large changes should be discussed in the development forum. This forum is NOT for support.
steved
Posts: 823
Joined: Fri Nov 09, 2012 2:22 pm
Has thanked: 12 times
Been thanked: 135 times

TODO: in files

Postby steved » Wed Feb 06, 2019 7:30 pm

'TODO' is a pretty standard word to put in source files to draw attention to code which needs further attention. Eclipse generates a list of the associated locations during compilation.

There are quite a lot of 'TODO's in the Chibi source files, which tend to swamp the list.

Could Chibi use a different word ('CHTODO', maybe) so that the average user of Chibistudio sees only their problems? (I realise that Eclipse can be configured to use different words, but it seems preferable to stick to the defaults for the normal user. It's also useful to have the Chibi code directory as a link).

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: TODO: in files

Postby Giovanni » Sat May 18, 2019 7:15 am

Hi,

I reduced all TODOs from board templates and regenerated all boards, this should reduce the noise.

Removed some instances in STM32 code too.

Giovanni

User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: TODO: in files

Postby tfAteba » Mon May 20, 2019 8:41 am

Hi steved, Hi Giovanni,

I will soon have more time also and I will also work on TODO list in the AVR part.
regards,

Theo.


Return to “Small Change Requests”

Who is online

Users browsing this forum: No registered users and 14 guests