mcuconf.h is quite complicated and we don't have a template to build it with yet. So, it would be useful to have example mcuconf.h files for each supported processor in hal_lld.h.
I'm currently using the STM32L496, and it is supported in hal_lld.h, but I don't see any example mcuconf.h to use. hal_lld.h expects certain #defines for the L496 which aren't in the L476 demo projects, and it is tough tracking it down. Furthermore, it has more peripherals (like CAN2, I2C4) .. so we need an mcuconf.h with all the fields present.
mcuconf.h for STM32L496 (and others ...) Topic is solved
- RoccoMarco
- Posts: 655
- Joined: Wed Apr 24, 2013 4:11 pm
- Location: Munich (Germany)
- Has thanked: 83 times
- Been thanked: 67 times
- Contact:
- Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: mcuconf.h for STM32L496 (and others ...)
Hi,
Now there are generators for the mcuconf.h files, only some platforms but it will be eventually done for all others.
Giovanni
Now there are generators for the mcuconf.h files, only some platforms but it will be eventually done for all others.
Giovanni
- Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: mcuconf.h for STM32L496 (and others ...)
Next will be L4+ then others gradually, very old platforms may not receive it at all.
Giovanni
Giovanni
Return to “Small Change Requests”
Who is online
Users browsing this forum: No registered users and 9 guests