Page 8 of 9

Re: Digital pressure sensor Driver

Posted: Tue Sep 27, 2016 8:56 pm
by tfAteba
Hello RM,

I'm not sure that there is a sheild for the BMP085 sensor.

I used a Prototype PCB for Arduino and the BMP085 board. So I made my hown shield ;) .

You have an image of the board that I made.

Re: Digital pressure sensor Driver

Posted: Tue Sep 27, 2016 9:01 pm
by tfAteba
PS: I have also another I2C sensor on the same board!

Re: Digital pressure sensor Driver

Posted: Tue Sep 27, 2016 10:35 pm
by RoccoMarco
The small PCB is enough. I will buy one in tomorrow.

Re: Digital pressure sensor Driver

Posted: Thu Dec 08, 2016 12:18 am
by tfAteba
Hi RM,

Just want to know if you did have the time to buy and make some test with the sensor :) ?

Re: Digital pressure sensor Driver

Posted: Thu Dec 08, 2016 10:56 am
by RoccoMarco
Hey Theo,
bought it but still not arrived.

Re: Digital pressure sensor Driver

Posted: Fri Sep 22, 2017 10:39 pm
by tfAteba
Hello All,

Just a small post to tell that I added to the trunk the support of the digital barometer and a demo to show how to read data from the sensor.

The code still need to be improve to add some feature such as the measurement of the altitude for example.

The driver for the BMP085 is located under os/ex/Bosch. You can find the following files:
    - bmp085.c
    - bmp085.h
    - bmp085.mk

The demo for the BMP085 is located under testex/STM32/STM32F4xx/I2C-BMP085/ here are the files for the demo:
    - Makefile
    - chconf.h
    - halconf.h
    - main.c
    - mcuconf.h
    - readme.txt

I have made the test, it works fine for me, and I want to tell thanks for the SHELL, it is so nice :lol: .

So Rocco Marco, I thinks that the sensor you purchase is already arrived, so can you give also a try? it would be good :)

Thanks.

Re: Digital pressure sensor Driver

Posted: Sat Sep 23, 2017 10:57 am
by RoccoMarco
Thanks Theo,
your contribution is extremely appreciated.

I can provide you other MEMS if you want to help me to grow up EX.
Taking a look to the code.

Re: Digital pressure sensor Driver

Posted: Sat Sep 23, 2017 11:45 am
by RoccoMarco
Theo,
I have aligned documentation. The code is really good but I can see a potential problem with compensation. Get in touch with me I have some suggestions.

Re: Digital pressure sensor Driver

Posted: Sat Sep 23, 2017 10:53 pm
by tfAteba
Hello Marco,

Thank you for your feed back.

I'm sorry I was not at home today, I went to visit my nephews :D and I had a good time with them.

Rocco Marco wrote:
I can provide you other MEMS if you want to help me to grow up EX.

It would be nice to help you to add more support to your sub-project.

For the potential problem, we will see together what to do so as you said, let keep in touch. I will be happy to hear about your proposition.

Thanks.

Re: Digital pressure sensor Driver

Posted: Sun Sep 24, 2017 12:05 am
by RoccoMarco
tfAteba wrote:Hello Marco,
I'm sorry I was not at home today, I went to visit my nephews :D and I had a good time with them.


Matter of priorities :mrgreen: :mrgreen: