Digital pressure sensor Driver

Discussions and support about ChibiOS/EX, the External Peripherals Abstraction Layer.
User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: Digital pressure sensor Driver

Postby tfAteba » Tue Sep 27, 2016 8:56 pm

Hello RM,

I'm not sure that there is a sheild for the BMP085 sensor.

I used a Prototype PCB for Arduino and the BMP085 board. So I made my hown shield ;) .

You have an image of the board that I made.
Attachments
20160918_102627.jpg
regards,

Theo.

User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: Digital pressure sensor Driver

Postby tfAteba » Tue Sep 27, 2016 9:01 pm

PS: I have also another I2C sensor on the same board!
regards,

Theo.

User avatar
RoccoMarco
Posts: 655
Joined: Wed Apr 24, 2013 4:11 pm
Location: Munich (Germany)
Has thanked: 83 times
Been thanked: 67 times
Contact:

Re: Digital pressure sensor Driver

Postby RoccoMarco » Tue Sep 27, 2016 10:35 pm

The small PCB is enough. I will buy one in tomorrow.
Ciao,
RM

User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: Digital pressure sensor Driver

Postby tfAteba » Thu Dec 08, 2016 12:18 am

Hi RM,

Just want to know if you did have the time to buy and make some test with the sensor :) ?
regards,

Theo.

User avatar
RoccoMarco
Posts: 655
Joined: Wed Apr 24, 2013 4:11 pm
Location: Munich (Germany)
Has thanked: 83 times
Been thanked: 67 times
Contact:

Re: Digital pressure sensor Driver

Postby RoccoMarco » Thu Dec 08, 2016 10:56 am

Hey Theo,
bought it but still not arrived.
Ciao,
RM

User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: Digital pressure sensor Driver

Postby tfAteba » Fri Sep 22, 2017 10:39 pm

Hello All,

Just a small post to tell that I added to the trunk the support of the digital barometer and a demo to show how to read data from the sensor.

The code still need to be improve to add some feature such as the measurement of the altitude for example.

The driver for the BMP085 is located under os/ex/Bosch. You can find the following files:
    - bmp085.c
    - bmp085.h
    - bmp085.mk

The demo for the BMP085 is located under testex/STM32/STM32F4xx/I2C-BMP085/ here are the files for the demo:
    - Makefile
    - chconf.h
    - halconf.h
    - main.c
    - mcuconf.h
    - readme.txt

I have made the test, it works fine for me, and I want to tell thanks for the SHELL, it is so nice :lol: .

So Rocco Marco, I thinks that the sensor you purchase is already arrived, so can you give also a try? it would be good :)

Thanks.
regards,

Theo.

User avatar
RoccoMarco
Posts: 655
Joined: Wed Apr 24, 2013 4:11 pm
Location: Munich (Germany)
Has thanked: 83 times
Been thanked: 67 times
Contact:

Re: Digital pressure sensor Driver

Postby RoccoMarco » Sat Sep 23, 2017 10:57 am

Thanks Theo,
your contribution is extremely appreciated.

I can provide you other MEMS if you want to help me to grow up EX.
Taking a look to the code.
Ciao,
RM

User avatar
RoccoMarco
Posts: 655
Joined: Wed Apr 24, 2013 4:11 pm
Location: Munich (Germany)
Has thanked: 83 times
Been thanked: 67 times
Contact:

Re: Digital pressure sensor Driver

Postby RoccoMarco » Sat Sep 23, 2017 11:45 am

Theo,
I have aligned documentation. The code is really good but I can see a potential problem with compensation. Get in touch with me I have some suggestions.
Ciao,
RM

User avatar
tfAteba
Posts: 547
Joined: Fri Oct 16, 2015 11:03 pm
Location: Strasbourg, France
Has thanked: 91 times
Been thanked: 48 times

Re: Digital pressure sensor Driver

Postby tfAteba » Sat Sep 23, 2017 10:53 pm

Hello Marco,

Thank you for your feed back.

I'm sorry I was not at home today, I went to visit my nephews :D and I had a good time with them.

Rocco Marco wrote:
I can provide you other MEMS if you want to help me to grow up EX.

It would be nice to help you to add more support to your sub-project.

For the potential problem, we will see together what to do so as you said, let keep in touch. I will be happy to hear about your proposition.

Thanks.
regards,

Theo.

User avatar
RoccoMarco
Posts: 655
Joined: Wed Apr 24, 2013 4:11 pm
Location: Munich (Germany)
Has thanked: 83 times
Been thanked: 67 times
Contact:

Re: Digital pressure sensor Driver

Postby RoccoMarco » Sun Sep 24, 2017 12:05 am

tfAteba wrote:Hello Marco,
I'm sorry I was not at home today, I went to visit my nephews :D and I had a good time with them.


Matter of priorities :mrgreen: :mrgreen:
Ciao,
RM


Return to “ChibiOS/EX”

Who is online

Users browsing this forum: No registered users and 9 guests