Hi
the STM32F7 HAL is missing the code to set the LSEDRV bits.
STM327 HAL missing LSEDRV Topic is solved
STM327 HAL missing LSEDRV Topic is solved
- Attachments
-
- 0001-stm32f7xx_hal_lld-add-missing-LSEDRV-config.zip
- (1.1 KiB) Downloaded 186 times
-
Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: STM327 HAL missing LSEDRV
Hi,
The patch is not enough, it requires the value to be exported by the board files which will require a change in the generator tool.
Suspended.
Giovanni
The patch is not enough, it requires the value to be exported by the board files which will require a change in the generator tool.
Suspended.
Giovanni
Re: STM327 HAL missing LSEDRV
Patched generator files.
The default is "Low driving capability" and can cause problems like clock-jitter and very unprecise time.
The default is "Low driving capability" and can cause problems like clock-jitter and very unprecise time.
- Attachments
-
- f7-chibistudio.zip
- (3.86 KiB) Downloaded 189 times
-
Giovanni
- Site Admin
- Posts: 14455
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: STM327 HAL missing LSEDRV
Hi,
Thanks for the patch and changes to the generator, you got it mostly right, just the XML schema was missing.
Giovanni
Thanks for the patch and changes to the generator, you got it mostly right, just the XML schema was missing.
Giovanni
Who is online
Users browsing this forum: No registered users and 7 guests