It is just a reminder for my self.
On STM32F3Discovery starting from PCB revision C, PC4 and PC5 are connected to ST-Link V2-B. Must be configured as AF7.
Note that Uart1 is connected to ST-Link as default configuration. (SB13-SB15 ON)
Misconfiguration in STM32F3 Discovery board file Topic is solved
- RoccoMarco
- Posts: 655
- Joined: Wed Apr 24, 2013 4:11 pm
- Location: Munich (Germany)
- Has thanked: 83 times
- Been thanked: 67 times
- Contact:
- RoccoMarco
- Posts: 655
- Joined: Wed Apr 24, 2013 4:11 pm
- Location: Munich (Germany)
- Has thanked: 83 times
- Been thanked: 67 times
- Contact:
Re: Misconfiguration in STM32F3 Discovery board file Topic is solved
Added a new set of board files and a new demo.
As a separate note, launching demo on STM32F3 Discovery REV-C or higher requires OpenOCD on STLink V2-1 and target\stm32f3x.cfg as cfg (board\stm32f3discovery.cfg will not work)
As a separate note, launching demo on STM32F3 Discovery REV-C or higher requires OpenOCD on STLink V2-1 and target\stm32f3x.cfg as cfg (board\stm32f3discovery.cfg will not work)
Ciao,
RM
RM
Who is online
Users browsing this forum: No registered users and 58 guests