CycloneTCP/IP Stack as External Resource

This forum is dedicated to feedback, discussions about ongoing or future developments, ideas and suggestions regarding the ChibiOS projects are welcome. This forum is NOT for support.
User avatar
psavr
Posts: 26
Joined: Thu Feb 08, 2018 8:38 am
Location: Switzerland
Been thanked: 3 times

CycloneTCP/IP Stack as External Resource

Postby psavr » Mon Feb 03, 2020 11:45 am

CycloneTCP is a full featured TCP/IP Stack much comprehensive as LwIp, available also as open source.
=> https://www.oryx-embedded.com/products/CycloneTCP

Is it possible to add CycloneTCP as External Resource or at least to add an example project with proper ChibiOS <=> CyclonTCP integration?
Note: There are lots of demos within the opensource download package most using FreeRTOS...

User avatar
Giovanni
Site Admin
Posts: 12748
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 696 times
Been thanked: 573 times
Contact:

Re: CycloneTCP/IP Stack as External Resource

Postby Giovanni » Mon Feb 03, 2020 1:36 pm

Hi,

I will add as external resource for sure, it also supports ChibiOS out of the box. Never tried it, any experience to share?

Giovanni

User avatar
psavr
Posts: 26
Joined: Thu Feb 08, 2018 8:38 am
Location: Switzerland
Been thanked: 3 times

Re: CycloneTCP/IP Stack as External Resource

Postby psavr » Mon Feb 03, 2020 2:56 pm

>> any experience to share?

Not yet. I compiled some demos, this works out of the box. But I couldn't figure out how to merge their makefile with the Chibios makfile. I guess the way would be to setup the propper binding in \os\various ? But maybe I was searching too far..

User avatar
Giovanni
Site Admin
Posts: 12748
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 696 times
Been thanked: 573 times
Contact:

Re: CycloneTCP/IP Stack as External Resource

Postby Giovanni » Mon Feb 03, 2020 3:15 pm

A .mk could be created starting from their makefile, basically you just need the list of required files and directories.

Giovanni


Return to “Development and Feedback”

Who is online

Users browsing this forum: No registered users and 5 guests