Kinetis KL25Z Freedom Board - CM0+

ChibiOS public support forum for topics related to the Freescale Kinetis family of micro-controllers.

Moderator: utzig

mobyfab
Posts: 419
Joined: Sat Nov 19, 2011 6:47 pm
Location: Versailles, France
Has thanked: 3 times
Been thanked: 5 times

Kinetis KL25Z Freedom Board - CM0+

Postby mobyfab » Sat Jul 21, 2012 9:28 pm

Hey,

Freescale is releasing a new dev board, for around 10€.
It is based on the CM0+. There is an integrated debugged.

http://www.element14.com/community/docs/DOC-46626/l/element14-exclusive-freescale-kinetis-l-based-kl25z-freedom-development-board

User avatar
Giovanni
Site Admin
Posts: 11386
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 430 times
Been thanked: 363 times
Contact:

Re: Kinetis KL25Z Freedom Board - CM0+

Postby Giovanni » Sun Jul 22, 2012 8:19 am

It looks interesting, the page does not give any detail about that GDB server however.

Giovanni

User avatar
Giovanni
Site Admin
Posts: 11386
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 430 times
Been thanked: 363 times
Contact:

Re: Kinetis KL25Z Freedom Board - CM0+

Postby Giovanni » Mon Jul 23, 2012 12:57 pm

Farnell reports it available starting from 25 September, there is still time. I find it interesting because the CM0+, I like shiny new toys.

Giovanni

mobyfab
Posts: 419
Joined: Sat Nov 19, 2011 6:47 pm
Location: Versailles, France
Has thanked: 3 times
Been thanked: 5 times

Re: Kinetis KL25Z Freedom Board - CM0+

Postby mobyfab » Tue Jul 24, 2012 4:48 pm

so do I :D

I'm definately gonna get one.

mobyfab
Posts: 419
Joined: Sat Nov 19, 2011 6:47 pm
Location: Versailles, France
Has thanked: 3 times
Been thanked: 5 times

Re: Kinetis KL25Z Freedom Board - CM0+

Postby mobyfab » Tue Oct 09, 2012 12:12 pm


User avatar
Giovanni
Site Admin
Posts: 11386
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 430 times
Been thanked: 363 times
Contact:

Re: Kinetis KL25Z Freedom Board - CM0+

Postby Giovanni » Tue Oct 09, 2012 12:53 pm

It is in stock at Farnell, I will buy a couple.

Giovanni

mobyfab
Posts: 419
Joined: Sat Nov 19, 2011 6:47 pm
Location: Versailles, France
Has thanked: 3 times
Been thanked: 5 times

Re: Kinetis KL25Z Freedom Board - CM0+

Postby mobyfab » Fri Oct 12, 2012 1:27 pm


fpga_comp
Posts: 16
Joined: Thu Aug 28, 2014 2:00 pm

Re: Kinetis KL25Z Freedom Board - CM0+

Postby fpga_comp » Tue Oct 14, 2014 8:00 pm

Don't know if this replacement debugger firmware would work for the new boards. There are restrictions on how it is used.

https://www.segger.com/opensda.html
OpenSDA / OpenSDA V2 firmware
SEGGER offers a firmware running on the Freescale OpenSDA platform which makes OpenSDA compatible to J-Link Lite, allowing users to take advantage of most J-Link features like the ultra fast flash download and debugging speed or the free-to-use GDBServer, by using a low-cost OpenSDA platform for developing on evaluation boards.

colin
Posts: 149
Joined: Thu Dec 22, 2011 7:44 pm

Re: Kinetis KL25Z Freedom Board - CM0+

Postby colin » Thu Oct 16, 2014 11:15 pm

Yes, the Segger OpenSDA firmware is supposed to work on the FRDM-KL25Z. The newest Freedom boards use OpenSDAv2 (I think FRDM-K64F and K22F?). But Segger prohibits you from using it to program an external board. Lame. Of course they want you to buy the standalone J-Link for other stuff.

But I found that an ST-Link/V2 works fabulously with OpenOCD/gdb/ChibiOS. So I just solder on a standard Cortex Debug 10-pin header to the FRDM-KL25Z board and use my ST-Link/V2 with it. Beautiful.. Segger J-Link is a great product, but it's not necessary, especially if you want to hack on open source stuff or take advantage of OpenOCD's support for ChibiOS RTOS integration which is super helpful.

User avatar
Giovanni
Site Admin
Posts: 11386
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 430 times
Been thanked: 363 times
Contact:

Re: Kinetis KL25Z Freedom Board - CM0+

Postby Giovanni » Fri Oct 17, 2014 8:33 am

Hi,

Could you write a small guide about that? a lot of people have discovery boards that could be used that way.

Giovanni


Return to “Kinetis Support”

Who is online

Users browsing this forum: No registered users and 2 guests