ChibiOS/RT Codeblocks Setup

Discussions and support about ChibiOS/RT, the free embedded RTOS.
Muffins
Posts: 1
Joined: Sun Aug 26, 2018 10:51 pm

ChibiOS/RT Codeblocks Setup

Postby Muffins » Sun Aug 26, 2018 11:01 pm

Hello.

I've been playing around with a ChibiOS AVR port in the Arduino IDE. I want to try using it in the Codeblocks IDE.

My problem is that I am a newbie I'm not sure how to set this up. I've downloaded the files for ChibiOS/RT from the main site but it looks quite different to the ports I've downloaded from github and I don't know what to do with it. Do I need to find a gcc port and get it working with codeblocks somehow?

Could somebody walk me through it?

User avatar
Giovanni
Site Admin
Posts: 12101
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 549 times
Been thanked: 470 times
Contact:

Re: ChibiOS/RT Codeblocks Setup

Postby Giovanni » Mon Aug 27, 2018 7:23 am

Hi,

For the compiler go here: https://launchpad.net/gcc-arm-embedded

I cannot help about codeblocks, never used it.

Giovanni

User avatar
tfAteba
Posts: 519
Joined: Fri Oct 16, 2015 11:03 pm
Location: Chartres, France
Has thanked: 78 times
Been thanked: 45 times

Re: ChibiOS/RT Codeblocks Setup

Postby tfAteba » Tue Aug 28, 2018 8:51 am

Hello All,

Just to said that if you play with AVR part, you probably need to use "avr-gcc" not the ARM one.
regards,

Theo.


Return to “ChibiOS/RT”

Who is online

Users browsing this forum: No registered users and 1 guest