After running the test suite on Arduino Uno and Mega with success, I'm trying to run the test suite on xmega now.
The test suite hangs at the sequence 2 at test case 2.4
Here is the output of the test suite with the problem.
Code: Select all
*** ChibiOS/RT Test Suite
***
*** Compiled: Feb 12 2018 - 21:40:52
*** Platform: AVR XMEGA
*** Test Board: MT-DB-X4 board
============================================================================
=== Test Sequence 1 (Information)
----------------------------------------------------------------------------
--- Test Case 1.1 (Port Info)
--- Architecture: MegaAVR
--- Compiler: GCC 4.9.2
--- Port Info: None
--- Natural alignment: 1
--- Stack alignment: 1
--- Working area alignment: 1
--- Result: SUCCESS
----------------------------------------------------------------------------
--- Test Case 1.2 (Kernel Info)
--- Product: ChibiOS/RT
--- Stable Flag: 0
--- Version String: 5.0.0
--- Major Number: 5
--- Minor Number: 0
--- Patch Number: 0
--- Result: SUCCESS
----------------------------------------------------------------------------
--- Test Case 1.3 (Kernel Settings)
--- CH_CFG_ST_RESOLUTION: 16
--- CH_CFG_ST_FREQUENCY: 10000
--- CH_CFG_INTERVALS_SIZE: 16
--- CH_CFG_TIME_TYPES_SIZE: 16
--- CH_CFG_ST_TIMEDELTA: 0
--- CH_CFG_TIME_QUANTUM: 0
--- CH_CFG_MEMCORE_SIZE: 128
--- CH_CFG_NO_IDLE_THREAD: 0
--- CH_CFG_OPTIMIZE_SPEED: 1
--- CH_CFG_USE_TM: 0
--- CH_CFG_USE_REGISTRY: 1
--- CH_CFG_USE_WAITEXIT: 1
--- CH_CFG_USE_SEMAPHORES: 1
--- CH_CFG_USE_SEMAPHORES_PRI: 0
--- CH_CFG_USE_MUTEXES: 1
--- CH_CFG_USE_MUTEXES_RECURS: 0
--- CH_CFG_USE_CONDVARS: 1
--- CH_CFG_USE_CONDVARS_TIMEO: 1
--- CH_CFG_USE_EVENTS: 1
--- CH_CFG_USE_EVENTS_TIMEOUT: 1
--- CH_CFG_USE_MESSAGES: 1
--- CH_CFG_USE_MESSAGES_PRI: 0
--- CH_CFG_USE_MAILBOXES: 1
--- CH_CFG_USE_MEMCORE: 1
--- CH_CFG_USE_HEAP: 1
--- CH_CFG_USE_MEMPOOLS: 1
--- CH_CFG_USE_OBJ_FIFOS: 1
--- CH_CFG_USE_DYNAMIC: 0
--- CH_CFG_USE_FACTORY: 0
--- CH_CFG_FACTORY_MAX_NAMES_LENGTH: 8
--- CH_CFG_FACTORY_OBJECTS_REGISTRY: 1
--- CH_CFG_FACTORY_GENERIC_BUFFERS: 1
--- CH_CFG_FACTORY_SEMAPHORES: 1
--- CH_CFG_FACTORY_MAILBOXES: 1
--- CH_CFG_FACTORY_OBJ_FIFOS: 1
--- CH_DBG_STATISTICS: 0
--- CH_DBG_SYSTEM_STATE_CHECK: 0
--- CH_DBG_ENABLE_CHECKS: 0
--- CH_DBG_ENABLE_ASSERTS: 0
--- CH_DBG_TRACE_MASK: 255
--- CH_DBG_TRACE_BUFFER_SIZE: 128
--- CH_DBG_ENABLE_STACK_CHECK: 0
--- CH_DBG_FILL_THREADS: 0
--- CH_DBG_THREADS_PROFILING: 0
--- Result: SUCCESS
============================================================================
=== Test Sequence 2 (System layer and port interface)
----------------------------------------------------------------------------
--- Test Case 2.1 (System integrity functionality)
--- Result: SUCCESS
----------------------------------------------------------------------------
--- Test Case 2.2 (Critical zones functionality)
--- Result: SUCCESS
----------------------------------------------------------------------------
--- Test Case 2.3 (Interrupts handling functionality)
--- Result: SUCCESS
----------------------------------------------------------------------------
--- Test Case 2.4 (System Tick Counter functionality)
Can you please help me to understand what going on here so that I can solve the problem?
If you need mode details or the tested code I can provide it. It is not yet in the repository
Thanks
, but I will try to look into timer part