PORT of ChibiOS/RT on SPC564A

Discussions and support about ChibiOS/RT, the free embedded RTOS.
louis
Posts: 23
Joined: Tue May 17, 2016 9:26 am

PORT of ChibiOS/RT on SPC564A

Postby louis » Tue Jun 07, 2016 9:13 am

Hello,

I would like to do a portage of the ChibiOS/RT on my Power PC SPC564A (e200z4 core). I am using Code Warrior.

But, I am an beginner in this domain :? . Then, I don't know if you have a document which can explain how to process; Or if you have already a little project with this PPC.

Thank you for your help.

Louis

User avatar
Giovanni
Site Admin
Posts: 11831
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 522 times
Been thanked: 433 times
Contact:

Re: PORT of ChibiOS/RT on SPC564A

Postby Giovanni » Tue Jun 07, 2016 9:18 am

Hi,

Version 16.1 already supports SPC564A using the HighTec compiler. The code in repository supports codewarrior too, there are already working demos, it will be released in Q3.

Giovanni

louis
Posts: 23
Joined: Tue May 17, 2016 9:26 am

Re: PORT of ChibiOS/RT on SPC564A

Postby louis » Tue Jun 07, 2016 12:29 pm

Hi,

Thank you for your answer. Actually, I just want to copy/paste the RTOS in my project without involve it in my code.

But I don't see the linker file of the SPC564A (*.lcf). That's why when I try to compile it with CW, I have some "link error".
I don't know if you have it.

Best regards.
Louis

User avatar
Giovanni
Site Admin
Posts: 11831
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 522 times
Been thanked: 433 times
Contact:

Re: PORT of ChibiOS/RT on SPC564A

Postby Giovanni » Tue Jun 07, 2016 1:13 pm

Hi,

I have created demos only for SPC560D and SPC56EC so far, you need to adapt one of those icf files (the SPC56EC one is very close, same Z4).

Giovanni


Return to “ChibiOS/RT”

Who is online

Users browsing this forum: No registered users and 2 guests