Hi all Chibi gurus,
sorry for this stupid question but is this board well supported by Chibi ?
Where can I find ready to test projects on this board ? I am starting with RTOS and it 's very clever to get the magic combo:
- code
- toolchain
- supported board
I think (and hope) I have my envrionment setup OK (gcc-arm-none-eabi for Linux v 4.8q3), openocd 0.9
I have got one Xplained Pro board ..
So before starting writing my own code I'd like to test robust code...
I 've got another board (STM32 Nucleo L152) but can't find a working config forr openocd (to flash the binary)..I 've seen one demo for this board inside the Chibi directory
Thanks for your help
Regards
[Newbie]SAMl21 Xplained Pro
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: [Newbie]SAMl21 Xplained Pro
Hi,
Currently there is no support for that board and Atmel ARM MCUs in general. It is not that we avoiding it, just there is nobody working on it.
Your Nucleo board is supported, just download ChibiStudio and you will find a ready to go demo, including OpenOCD configurations.
Giovanni
Currently there is no support for that board and Atmel ARM MCUs in general. It is not that we avoiding it, just there is nobody working on it.
Your Nucleo board is supported, just download ChibiStudio and you will find a ready to go demo, including OpenOCD configurations.
Giovanni
Re: [Newbie]SAMl21 Xplained Pro
Hi Giovanni,
thanks for the quick answer.
I will retry ChibiStudio , my first attempts inside a Virtualbox VM lead me to different problems.
Thanks again
regards
thanks for the quick answer.
I will retry ChibiStudio , my first attempts inside a Virtualbox VM lead me to different problems.
Thanks again
regards
Who is online
Users browsing this forum: No registered users and 33 guests