tfAteba wrote:I supposed that you made your test with atmega328p mcu only?
Yes, that is correct.
tfAteba wrote:If so, I will also made test with mega2560 to see if every things is fine.
tfAteba wrote:Also for test, did you use the same test program under testhal/AVR/EXT withoug any modifications? If y made your own test application could you also add it.
No, I used my application, which uses 4 input lines as interrupt sources.
I also used my board and makefile, still from the same application.
Now that you have proper board fiels for MiniPro, I'm planning to move to them, so I'll confirm that everything works fine.
Unfortunately ATM I do not have too much time available for this hobby.