sh.exe has stopped working Topic is solved

[ep.hobbyiest]

Hi,
chibi-studio was working fine till yesterday. But after that i install driver for proliific usb to serial.And today when start compilation, i got plenty of errors.
Following are the errors.

Code: Select all

21:45:45 **** Clean-only build of configuration Default for project BMB ****
make clean
      0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487
AllocationBase 0xB70000, BaseAddress 0xD40000, RegionSize 0x2D000, State 0x2000
C:\ChibiStudio\tools\gnutools\bin\sh.exe: *** Couldn't reserve space for cygwin's heap, Win32 error 0
      0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487
AllocationBase 0xD10000, BaseAddress 0xD40000, RegionSize 0x1CD000, State 0x2000
C:\ChibiStudio\tools\gnutools\bin\sh.exe: *** Couldn't reserve space for cygwin's heap, Win32 error 0
m.AllocationBase 0xCD0000, m.BaseAddress 0xD40000, m.RegionSize 0x18D000, m.State 0x2000
C:\ChibiStudio\tools\gnutools\bin\cat.exe: *** Couldn't reserve space for cygwin's heap (0xD40000 <0x10B0000>) in child, Win32 error 0
      0 [main] us 0 open_stackdumpfile: Dumping stack trace to us.stackdump
      0 [main] us 0 open_stackdumpfile: Dumping stack trace to us.stackdump
      0 [main] sh 5920 sync_with_child: child 3408(0x240) died before initialization with status code 0xC0000005
   1283 [main] sh 5920 sync_with_child: *** child state waiting for longjmp
/usr/bin/sh: fork: Resource temporarily unavailablea
      0 [main] us 0 init_cheap: VirtualAlloc pointer is null, Win32 error 487
AllocationBase 0x0, BaseAddress 0xCB0000, RegionSize 0x180000, State 0x10000
C:\ChibiStudio\tools\gnutools\bin\echo.exe: *** Couldn't reserve space for cygwin's heap, Win32 error 0

i replaced new chibistudio then also same error. Is there something wrong with tools?

[Giovanni]

Tools do not stop working for no reason, something happened on that PC that is preventing cygwin to work. Try uninstalling those drivers.

Giovanni

[ep.hobbyiest]

Thanks Giovanni,
It is working after uninstalling usb2serial driver. But i wanna use that one too. I think i will have to change the converter.