SAM7H256

ChibiOS public support forum for topics related to the Atmel AT91SAM7x family of micro-controllers.
arunarasu
Posts: 1
Joined: Fri Apr 12, 2013 2:45 am

SAM7H256

Postby arunarasu » Fri Apr 12, 2013 2:49 am

Hey

I want to run Chibios on my Olimnex SAM7H256 development board. However, there is no board.h or board.c file for this.

How should I go about implementing this?

Thanks

User avatar
Tectu
Posts: 1226
Joined: Thu May 10, 2012 9:50 am
Location: Switzerland
Contact:

Re: SAM7H256

Postby Tectu » Fri Apr 12, 2013 5:18 am

Hello arunarus,

I'm not into the SAM things at all, but the process is the same for all MCUs: In your case, it's recommended to take one of the two existing board files for the SAM7 boards of olimex, copy it, rename it and then simply modify the necessary things. I took a look at the olimex boads and it looks like the H256 board features exactly the same MCU as the P256. Therefore, I'd go with the P256 board files.

You my want to share your board files in the 'Contributions' section of this forum when you're done ;-)


~ Tectu


Return to “AT91SAM7x Support”

Who is online

Users browsing this forum: No registered users and 5 guests