USB HS on STM32H7 supported ?

ChibiOS public support forum for topics related to the STMicroelectronics STM32 family of micro-controllers.

Moderators: barthess, RoccoMarco

vadimus
Posts: 1
Joined: Tue May 05, 2020 10:09 pm

USB HS on STM32H7 supported ?

Postby vadimus » Tue May 05, 2020 10:44 pm

Hi,

Is the USB high speed (with external ULPI PHY and DMA controller) supported on H7 ?

I'm looking to start a project that requires high speed (~10-15MB/sec) USB rates, so my first inclination is to look at H7 chip at 480Mhz. I've seen posts here that mention F7 HS USB working, but couldn't find any mention of H7.

User avatar
Giovanni
Site Admin
Posts: 12963
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 735 times
Been thanked: 610 times
Contact:

Re: USB HS on STM32H7 supported ?

Postby Giovanni » Wed May 06, 2020 4:52 am

Hi,

The DMA is not yet supported, the external PHY is untested on H7 but it works on other devices with the same OTG.

Giovanni

rew
Posts: 325
Joined: Sat Jul 19, 2014 12:59 pm
Been thanked: 8 times

Re: USB HS on STM32H7 supported ?

Postby rew » Wed May 13, 2020 7:16 am

There is also one with internal high speed phy: STM32F730Z8. And apparenltly some STM32F7x3 devices.

I have a board with an STM32F730 on it but I haven't had time to test the second USB port yet.


Return to “STM32 Support”

Who is online

Users browsing this forum: No registered users and 3 guests