Hi friends,
May you tell me how to write or make program to print String from stm32f407 to eclipse when we run or debug program?
As you know stlink of stm32f407 does not use UART port. Do you have any guide for that.
Thanks so much
Print String with stm32f407 discovery
Moderators: RoccoMarco, barthess
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Print String with stm32f407 discovery
Hi,
You need to use a serial port and an serial/USB adapter I think.
Giovanni
You need to use a serial port and an serial/USB adapter I think.
Giovanni
Re: Print String with stm32f407 discovery
Giovanni wrote:Hi,
You need to use a serial port and an serial/USB adapter I think.
Giovanni
Hi Giovanni,
May we use USB CDC for printing String?
if possible, do you have tutorial or how to setup USB CDC?
Thanks so much
- Giovanni
- Site Admin
- Posts: 14457
- Joined: Wed May 27, 2009 8:48 am
- Location: Salerno, Italy
- Has thanked: 1076 times
- Been thanked: 922 times
- Contact:
Re: Print String with stm32f407 discovery
Hi,
All USB demos do exactly that, the example is there.
Giovanni
All USB demos do exactly that, the example is there.
Giovanni
Who is online
Users browsing this forum: No registered users and 69 guests