STM32F207xE demos problem Topic is solved

ChibiOS public support forum for topics related to the STMicroelectronics STM32 family of micro-controllers.

Moderators: barthess, RoccoMarco

nojwa
Posts: 3
Joined: Sat Oct 13, 2018 9:05 pm
Has thanked: 1 time

STM32F207xE demos problem

Postby nojwa » Sat Oct 13, 2018 9:34 pm

I have problem with demos for STM32F207xE.

I compiled both demos for F207xG, loaded to my board, but nothing happens. Leds not blinking and serial line is dead. No data send it to console.

All my changes are: ld script change flash size to 512K (STM32F207xG.ld), target for my led is on GPIOE (4). In discovery demos change serial line from SD2 to SD3

Version CHIBIOS 18.2.1.

Board is ok, because my project in chibios 3.x.x is fully functional.

It's needed some next changes?

User avatar
Giovanni
Site Admin
Posts: 11306
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 412 times
Been thanked: 342 times
Contact:

Re: STM32F207xE demos problem

Postby Giovanni » Sat Oct 13, 2018 9:51 pm

Hi,

Hard to tell what regressed, I have no board to test. What board are you using? are board files compatible? is the program even running?

Giovanni

nojwa
Posts: 3
Joined: Sat Oct 13, 2018 9:05 pm
Has thanked: 1 time

Re: STM32F207xE demos problem

Postby nojwa » Sun Oct 14, 2018 6:57 am

I agree, it's very abstract description. I known, that PC changing posistion, so program is running.

I have my own board, unfortunately I don't have a kit. Boards should be compatible.

I don't known, where is problem. I'll try to get the kit and load the demo.

I'll be back when I have a kit.

User avatar
Giovanni
Site Admin
Posts: 11306
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 412 times
Been thanked: 342 times
Contact:

Re: STM32F207xE demos problem

Postby Giovanni » Sun Oct 14, 2018 10:39 am

I would verify board files as first thing.

Giovanni

nojwa
Posts: 3
Joined: Sat Oct 13, 2018 9:05 pm
Has thanked: 1 time

Re: STM32F207xE demos problem  Topic is solved

Postby nojwa » Wed Oct 17, 2018 7:58 pm

Yes, it was right way.

As the first thing i try the kit for STM32F207 and the demo for ST_STM32F2_DISCOVERY was fully operational.

For my board it was necessary to modify settings of pins on port in board.h. Demos are funcional.

Thx you for support


Return to “STM32 Support”

Who is online

Users browsing this forum: No registered users and 8 guests