Migration from STM32F105 board to STM32F411 board

ChibiOS public support forum for topics related to the STMicroelectronics STM32 family of micro-controllers.

Moderators: RoccoMarco, barthess

chaouchh
Posts: 3
Joined: Tue Apr 10, 2018 11:12 am

Migration from STM32F105 board to STM32F411 board

Postby chaouchh » Tue Apr 10, 2018 11:18 am

Hi everybody,

Right now I have the PCB card Designed for STM32F105.

Our objective is to use the same PCB card to STM32F411 by porting the SW application to the new library (Done).

- For the SW side we did all the recommended change based on the application note :
Migration of microcontroller applications from STM32F1 Series to STM32F4 Access lines
-For the HW side we made only one change on the board :
PB11 (STM32F105) -----> VCAP_1 (STM32F411) adding a capacitor.

As a result:
- Our application not stable "work for some seconds after that the micro-controller Hangup".

For the HW side have you any suggestion or recommendation?
- (We have the QFP64 package of STM32F411).
- Our application use I2C, UART 2 and USB-OTG for charging the battery.


Thanks in advance and Best Regards,

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: Migration from STM32F105 board to STM32F411 board

Postby Giovanni » Tue Apr 10, 2018 11:58 am

Are you sure that the hangup is an HW problem?

Giovanni

chaouchh
Posts: 3
Joined: Tue Apr 10, 2018 11:12 am

Re: Migration from STM32F105 board to STM32F411 board

Postby chaouchh » Tue Apr 10, 2018 12:09 pm

I'm not 100% sure but I guess yes:
Our application use I2C, UART 2 and USB-OTG for charging the battery and when I look to the application note:
STM32 peripheral compatibility between STM32F1 and STM32F4:
- I2C :
SW: Full Compatibility.
- USART 2:
SW: Full Compatibility.
- USB-OTG: Full Compatibility.

I guess, as a first step I have to be sure that the HW side is compatible. am I right?
How can I proceed to be sure that there is nothing to do on that side.

Thanks

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: Migration from STM32F105 board to STM32F411 board

Postby Giovanni » Tue Apr 10, 2018 12:34 pm

Hi,

There are fundamental differences between F105 and F411, DMAs, GPIOs, clock tree and much more.

This forum is for ChibiOS support, which apparently you are not even using. Probably you should direct this kind of questions to ST on their boards.

Giovanni

chaouchh
Posts: 3
Joined: Tue Apr 10, 2018 11:12 am

Re: Migration from STM32F105 board to STM32F411 board

Postby chaouchh » Tue Apr 10, 2018 12:51 pm

My next step should be the using of ChibiOS.

This is why I look to port our application to ST32F4 then focus on ChibiOS.

Anyway Thanks for your help.

BR,
Haithem


Return to “STM32 Support”

Who is online

Users browsing this forum: No registered users and 31 guests