Hi,
Today I am register into Chibios forum
I have installed JRE, GCC, Eclipse Luna and ChibiStudio
I am new to chibi OS after installed tested one sample code, which giving following statement and problems.
In console i getting this statment
make: Nothing to be done for `all'.
In problem window I am getting these statment.
Description Resource Path Location Type
make: *** No rule to make target `../../../os/common/ports/ARMCMx/compilers/GCC/rules.mk'. Stop. Chibi1 C/C++ Problem
Then i have cheked un-resloved option there were 3 unresloved files found
Unresolved inclusion: ch.h
Unresolved inclusion: hal.h
Unresolved inclusion: test.h
Then I hve shown the PATH in C/C++ General->Paths and Symbols->Library paths
as I putted like
C:\ChibiStudio_Preview19 (1)\ChibiStudio\chibios161\os\hal\include\hal.h
C:\ChibiStudio_Preview19 (1)\ChibiStudio\chibios161\os\rt\include\ch.h
C:\ChibiStudio_Preview19 (1)\ChibiStudio\chibios161\test\rt\test.h
make: Nothing to be done for `all'.
-
- Posts: 2
- Joined: Wed Feb 07, 2018 6:35 am
Re: make: Nothing to be done for `all'.
after doing this when i build again I am getting same problem.
- RoccoMarco
- Posts: 655
- Joined: Wed Apr 24, 2013 4:11 pm
- Location: Munich (Germany)
- Has thanked: 83 times
- Been thanked: 67 times
- Contact:
Re: make: Nothing to be done for `all'.
Hello,
most likely you haven't installed properly the toolchain. You can find a detailed walk-through here
most likely you haven't installed properly the toolchain. You can find a detailed walk-through here
Ciao,
RM
RM
Re: make: Nothing to be done for `all'.
If a demo project has been copied into a workspace, then its necessary to modify the makefile with the correct path to the chibios libraries; for example:
Then 'Clean' and remake.
Code: Select all
CHIBIOS = ../../ChibiOS_17.6.3
Then 'Clean' and remake.
Who is online
Users browsing this forum: No registered users and 25 guests