Generate files from configuration data does nothing.

Discussions and support about ChibiStudio, the free development environment for ARM.
steved
Posts: 823
Joined: Fri Nov 09, 2012 2:22 pm
Has thanked: 12 times
Been thanked: 135 times

Re: Generate files from configuration data does nothing.

Postby steved » Tue Nov 21, 2017 9:17 am

villains wrote: Nothing appears in the console when I click the "Generate Files from Configuration Data" button or menu option.

The critical thing here is to have the board configuration file highlighted (selected) in the Project Explorer window when you click on "Generate Files from Configuration Data"

villains
Posts: 8
Joined: Mon Nov 20, 2017 1:38 am
Has thanked: 1 time

Re: Generate files from configuration data does nothing.

Postby villains » Tue Nov 21, 2017 6:49 pm

Hi steved,

That worked!!
Thank you.

When the instructions said to "select" the .chcfg file, I understood that to mean to have the file active in the editor. Confusingly, the "Generate Files from Configuration Data" button and menu item do appear when this is done, leading me to believe it was the correct action.

For the benefit of future victims users, is there any way to update the board config wizard plugin to run with the .chcfg file active in the editor as well? If not, then at least it would be nice to have a screenshot explaining exactly what "select" means in this context, in any documents or guides for the board config wizard.

Thank you again, steved and Giovanni, for the support.

Best regards

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: Generate files from configuration data does nothing.

Postby Giovanni » Tue Nov 21, 2017 7:15 pm

Strange, I wasn't aware that the menu shows up by just opening the file.

Giovanni

villains
Posts: 8
Joined: Mon Nov 20, 2017 1:38 am
Has thanked: 1 time

Re: Generate files from configuration data does nothing.

Postby villains » Tue Nov 21, 2017 7:34 pm

Another possibility is to move the "Generate Files from Configuration Data" menu item to the right-click menu for .chcfg files. I don't know if that is possible in Eclipse. But this way, there would be only one direct way to activate this feature. There would be no ambiguity as to what is the correct way to select a file.

Best regards

User avatar
Giovanni
Site Admin
Posts: 14444
Joined: Wed May 27, 2009 8:48 am
Location: Salerno, Italy
Has thanked: 1074 times
Been thanked: 921 times
Contact:

Re: Generate files from configuration data does nothing.

Postby Giovanni » Tue Nov 21, 2017 10:28 pm

Eclipse is hard to work with, documentation is had to find and navigate.

Patches are welcome, the source code is on repository :)

Giovanni

villains
Posts: 8
Joined: Mon Nov 20, 2017 1:38 am
Has thanked: 1 time

Re: Generate files from configuration data does nothing.

Postby villains » Wed Nov 22, 2017 1:06 am

Hi Giovanni,

Message received :)

Best regards


Return to “ChibiStudio”

Who is online

Users browsing this forum: No registered users and 3 guests