The clone has got the latest firmware and it works fine with stlink-utility (when flashing the .bin).
While trying to use it under chibistudio (stlink v1, v2, v2-1) I get with st32vldiscovery.cfg (vldisco onboard stlink is disconnected):
Code: Select all
Warn : Interface already configured, ignoring
Error: already specified hl_layout stlink
Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
none separate
srst_only separate srst_nogate srst_open_drain connect_deassert_srst
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : Unable to match requested speed 1000 kHz, using 950 kHz
Info : clock speed 950 kHz
Error: open failed
in procedure 'init'
in procedure 'ocd_bouncer'
Any hint how to get it working, plz?