ChibiStudio 2020

Discussions and support about ChibiStudio, the free development environment for ARM.
Posts: 733
Joined: Fri Nov 09, 2012 2:22 pm
Has thanked: 10 times
Been thanked: 108 times

Re: ChibiStudio 2020

Postby steved » Fri Jul 17, 2020 1:29 pm

I'll have a better look later. However it's worth pointing out that in my case, using identical code, reading the trace works with ChibiStudio21, and not with ChibiStudio_2020. And the other tabs on the Chibi plugin work as expected.
(I did also have a problem if the thread name contained the '&' character)

Posts: 151
Joined: Wed Jan 09, 2019 12:37 pm
Has thanked: 19 times
Been thanked: 23 times

Re: ChibiStudio 2020

Postby mikeprotts » Fri Jul 17, 2020 2:30 pm

Giovanni wrote:StkUnused == 0 means a likely stack overflow.

You should have some filler left in each stack.


I do have a filler - 280 bytes still at 0x55.

In fact it seems to be a conversion error, I tried 6k and it showed zero, 8k showed 8192 and 9k also showed 8192.


Return to “ChibiStudio”

Who is online

Users browsing this forum: No registered users and 1 guest