gdisp, stm32f4 and fsmc

User avatar
alex31
Posts: 281
Joined: Fri May 25, 2012 10:23 am
Location: toulouse, france
Has thanked: 23 times
Been thanked: 36 times
Contact:

gdisp, stm32f4 and fsmc

Postby alex31 » Tue Dec 18, 2012 6:23 pm

Hello, I have discovered this nice GFX project, and bought ssd1289 screen to try it. I plan to use
the fsmc mode. I have found the gdisp_lld_board_example_fsmc.h file, but it lacks wiring help,
On the stm side 11 pins are used on portD, and 9 on portE,
On the controller side, there is RS, WR, RD, CS, and DB0 to DB15, i need to know how to wire the 20 pins of each side.

This information could be but as comment in the gdisp_lld_board_example_fsmc.h file

Thanks for any help
Alexandre

User avatar
Tectu
Posts: 1226
Joined: Thu May 10, 2012 9:50 am
Location: Switzerland
Contact:

Re: gdisp, stm32f4 and fsmc

Postby Tectu » Tue Dec 18, 2012 6:34 pm

Hello Alexandre,

You are right that this should definitely be documented!
The recommended wiring is listed in this table: http://www.element14.com/community/groups/development-tools/blog/2012/05/26/stm32f4-discovery-hy32d-tft-lcd

Feel free to ask if you have any questions!


~ Tectu

User avatar
alex31
Posts: 281
Joined: Fri May 25, 2012 10:23 am
Location: toulouse, france
Has thanked: 23 times
Been thanked: 36 times
Contact:

Re: gdisp, stm32f4 and fsmc

Postby alex31 » Tue Dec 18, 2012 6:49 pm

thanks a lot for this blazingly fast answer !

Alexandre

User avatar
Tectu
Posts: 1226
Joined: Thu May 10, 2012 9:50 am
Location: Switzerland
Contact:

Re: gdisp, stm32f4 and fsmc

Postby Tectu » Tue Dec 18, 2012 6:51 pm

When I'm at home, the ChibiOS forum is always an open tab so fast answers are quite possible. It get's harder when I'm on the road ;-)


~ Tectu


Return to “LCD Driver and Graphic Framework”

Who is online

Users browsing this forum: No registered users and 1 guest