Search found 5 matches

by prashanth206
Wed Feb 12, 2020 3:06 pm
Forum: STM32 Support
Topic: Interrupt configuration STM32F7
Replies: 1
Views: 531

Interrupt configuration STM32F7

Hey all, I was trying to enable second GPIO pin as interrupt using, palEnablePadEvent(GPIOD, 4U, PAL_EVENT_MODE_BOTH_EDGES); I am getting an assert in below at _pal_lld_enablepadevent can someone explain why it happens Im using STM32F767VIT6. /* Multiple channel setting of the same channel not allow...
by prashanth206
Thu Aug 15, 2019 11:31 am
Forum: STM32 Support
Topic: STM32F767 SPI interfaced to ICM20948
Replies: 8
Views: 833

Re: STM32F767 SPI interfaced to ICM20948

Hello, Greetings, I think i'm running into some serious issues here. I figured this out when trying to run the SPI test application for my board. I had designed the custom hardware with STM32F767VIT6 with 100 pin package, its different from the general STM32F767xx and more similar to STM32F765xx. As...
by prashanth206
Tue Aug 13, 2019 5:29 pm
Forum: STM32 Support
Topic: STM32F767 SPI interfaced to ICM20948
Replies: 8
Views: 833

Re: STM32F767 SPI interfaced to ICM20948

Hi, Greetings, the only other peripheral i have enabled is I2C using DMA. I had also had enabled checks, assertions and state checker in chconf.h, no system halt due to assert is observed. When interrupted system is at Idle thread and waits for interrupt. Do i need to do any configuration of functio...
by prashanth206
Tue Aug 13, 2019 4:04 pm
Forum: STM32 Support
Topic: STM32F767 SPI interfaced to ICM20948
Replies: 8
Views: 833

Re: STM32F767 SPI interfaced to ICM20948

Hi, Greetings, I am using the mcuconf as in the stm32f7 demo project /* * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 TRUE #define STM32_SPI_USE_SPI2 TRUE #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - Inv...
by prashanth206
Tue Aug 13, 2019 11:48 am
Forum: STM32 Support
Topic: STM32F767 SPI interfaced to ICM20948
Replies: 8
Views: 833

STM32F767 SPI interfaced to ICM20948

Hello, Warm greetings, I have been trying to use the SPI hal driver to interact with ICM20948 interfaced to SPI1 in custom board that i have made. Following is the SPI configuration which i am using, static const SPIConfig spid1_cfg = { false, //circular mode NULL, //complete callback SPI_SOCKET_1_C...

Go to advanced search