ChibiOS Free Embedded RTOS

Hi RoccoMarco; Thank you for this information. I am grateful. I would just say that I have make some efforts to adapt new toolchain (ChibiOS 182) with demo of reading data of sensors. I have posted my program and I have asked some questions, Unfortunately, I have seen lot of number of views but any ...

Hi; A message adressed to those who read my program for reading data of sensors of STM32F303 Discovery, which is posted two weeks ago. Please, if you use it, you make SAMIR ZEMAM and Jeorme Le Ny as the pricipal authors of this. And, Giovanni as author of chibios. Thank you very much; Best Reagrds; ...

Hi; A message adressed to those who read my program for reading data of sensors of STM32F303 Discovery, which is posted two weeks ago. Please, if you use it, you make SAMIR ZEMAM and Jeorme Le Ny as the pricipal authors of this. And, Giovanni as author of chibios. Thank you very much; Best Reagrds; ...

Hi giovanni;

My message had posted in support forum (STM32 FORUM)

Thank you for helping me.

Giovanni wrote:Please try to post on the proper forum, this kind of things should go in the support forum.

Giovanni

Hi all; I have a STM32F303 kit equipped with IMU (3 DOF each, magnotometer, gyroscope and accelerometer). I have developped a program for rading the sensors data for three sensors (mentionned previously) via serial bus USB. I had several errors and I had therfore solved them. Finally, my program wor...

Hi all; I have a STM32F303 kit equipped with IMU (3 DOF each, magnotometer, gyroscope and accelerometer). I have developped a program for rading the sensors data for three sensors (mentionned previously) via serial bus USB. I had several errors and I had therfore solved them. Finally, my program wor...

I am connected. Where are you? Thanks. Ok, understand, Calm down we will manage the compilation errors. First of all a lot of changes have been made since 2.6.6 so your main.c is no longer up to date. You don't need to keep the makefile of 2.6.6 you must keep the make file of the 18.2.1 this one is ...

Hi; I use the 18.2.1. my make file and the main are posted in the previous message. My main is used before for the older version (chibios 2.6.6), but my main do not contain the paths and configurations. It serves for readind sensor data. In addition, it had worked in chibiOS 2.6.6, before. I am nerv...

Hi Theo; I have followed your steps, the demo is worked fine. and I have copy my main in originaly main, and I have recompiled it. The console posted me that there is an error. make: Nothing to be done for 'all' You know what does mean this error. Thanks; SAMIR ZEMAM When you have made a copy of the...

Hi ; What do you mean by "you can implement your program in the main.c file". Can you show me the steps in depth. Thank you very much. SAMIR ZEMAM Hello Sazem, To resolve this error, the easy way is to: - Compil ethe demo under demos/STM32/RT-STM32F303-DISCOVERY/ and see that every things ...